- Mounting Type: PCB Mounted Through Hole
- Contact Arrangement: 2 form A (NO)
- Rated Coil Voltage: 12VDC- Maxmum contact voltage: 277VAC
- Contact Gap: 3mm (@4kV Withstand Voltage)
- Number of Operations: 50,000 cycles @32A, 230-250V
- Contact Resistance/Load Category: CC2
- Short Response Time
- Comply with UL, TUV Certified, IEC 61851-1/IEC 61810-1/IEC 62955 Standard
- The Contact Spacing is Large, and the Withstand Voltage Reaches 4500Vac
- Suitable for American/EU Standard Charging Piles
Product Feature
- Mounting type: PCB mounted through hole
- Contact arrangement: 2 form A (NO)
- Rated coil voltage: 12VDC- Maxmum contact voltage: 277VAC
- Contact gap: 3mm (@4kV Withstand Voltage)
- Number of operations: 50,000 cycles @32A, 230-250V
- Contact resistance/load category: CC2
- Short response time
- Comply with UL, TUV certified, IEC 61851-1/IEC 61810-1/IEC 62955 standard
- The contact spacing is large, and the withstand voltage reaches 4500VAC
- Suitable for American/EU standard charging piles
Product Parameters
Specification | Weight | ≈70g | |
Continuous Current | 40A | ||
Contact Form | 2A | ||
Contact Material | AgSnO2 | ||
Max. Switching Voltage | 277VAC | ||
Initial Contact Resistance | 10mΩ (at 20A) | ||
Insulation Resistance | 100MΩ,at 500VDC,50% RH | ||
Mechanical Endurance | 1*106 ops | ||
Electrical Endurance | 5*104 ops(@32A 230VAC) 2*104 ops(@40A 230VAC) | ||
Dielectric withstanding voltage | Across Open Contact | 4000VAC 1min | |
Coil to Contact | 801A: 4000VAC 1min | ||
Pick-up & Release Time | 30ms. typical/10ms. typical | ||
Environment Temperature | Operation: -40℃~85℃ | ||
Storage: -40℃~125℃ | |||
Vibration | 10-40Hz,DA1.27mm, 40-70Hz:5g 70-100Hz:DA0.5mm,100-500Hz:5g | ||
Shock Resistance: | 20g, 11ms | ||
Dielectric Strength | 500Vrms, 1min |
Product Dimension
Product Application
• Photovoltaic Power Generation Systems (Solar Inverter)
• Uninterruptible Power Supplies (UPS)
• Inverter
• Industrial Equipment
• EV Charging Systems & EVSE Design